|
The welding machine can be put into operation
using a pushbutton 1, then the control LED 2 is
on and the basic menu appears on the display 3. Keys
with arrows defgare used for moving from one item to another
and the option is confirmed by the key h. These keys also
control other options such as entering of names of welders,
site masters and constructions. In case of an entry error
the incorrect character can be deleted using the key F.
In addition to the values, the display shows status of the
welding process using a control LED 6, the LED 7
indicates a welding failure. The equipment can be switched
off using the key 4, which is doubled due to safety
reasons 5.
|
|
|
Additional functions are controlled by
one of the five keys with simultaneous depression of
the switch-on key 1. In case there is also simultaneously
depressed the arrow up B or down C the contrast
of the display can be regulated.
The combination with the arrow to the right D there
is switched on the printing output. After connection to
a PC the communication can be switched on using the combination
of the switch-on pushbutton with the key E.
Depression of F together with the switch-on pushbutton
displays the time remaining to the next service inspection.
Depression of A together with the switch-on pushbutton
displays AC voltage.
|
|
