sales(at)dytron.cz +420 555 531 111

Training

Dassault Systèmes product training

We are a certified education partner of Dassault Systèmes for the CATIA, ENOVIA, DELMIA, and CATIA Composer systems. However, we do not only offer standard training for the required system version, but also education customized to the needs of individual customers.

Since 1995, we have trained more than 2,000 users in over 120 notable companies, mainly from the aerospace and automotive industries. We would be glad if yours became one of them.

 

Why should you go for it with us?

  • We enjoy long-term close contact with the software producer, which is positively reflected in the quality of our training.
  • Our instructors approach each participant individually. Emphasis is placed primarily on work procedures using the task-based approach.
  • The use of e-Learning services for self-study or to revise trained knowledge is a matter of course.
    Above all, we optimize your learning processes and raise your employees’ use of the software several levels higher.

 

Company educational program

We are part of the official education program of Dassault Systèmes, which brings you a number of benefits:

  • We train using Dassault Systèmes education licenses in our training classrooms.
  • We use the official documentation and the curriculum of CATIA and ENOVIA courses directly from Dassault Systèmes. The documentation is optimized for the needs of most effective educational process.
  • Training materials for official DS courses are sold in printed form, with included official 3D training data.
  • As a certified Education Partner, we have a license to translate official training materials. The documentation of CATIA and ENOVIA courses is therefore translated into Czech.

 

Training centers

We currently have four modern training centers in Novy Jicin, Prague and Liberec. These centers are equipped with high-performance computer technology, a corresponding number of training licenses, and offer a range of amenities and pleasant background for your study. The capacity of the classrooms is 8 to 10 working places. Our training centers are very easily accessible from the main roads and classrooms are air-conditioned.

 

     

 

  • Classrooms have an inter-connected computer network, data projector, and notice board for illustrating each feature.
  • Participants on the training course are provided with a relaxation room, including a kitchen with a light refreshment.
  • However, we can also provide high-quality teaching for you using fully-equipped mobile workstations.

Training costs

The cost of training depends on the number of training hours and how the licenses for the trained system are used. Customers who purchase both CATIA software and workstations through our company are provided with significant discounts on their training.

If you would like us to send you the price list of individual training courses, please contact us: , tel. +420 737 200 541 .

Acreditation from the Ministry of Education

The Ministry of Education, Youth and Sports has granted accreditation to DYTRON’s training program in the range of 80 teaching hours, and commissioned it to issue a job requalification certificate with national validity:

Design and creation of technical documentation in CAD

The range of 80 teaching hours responds to the CATIA V5 Basic Course.

Due to accreditation, the training fee is exempt from VAT (pursuant to Section 57 (1) (d) and Paragraph 2 of Act No. 235/2004, on Value Added Tax); part of the costs may also be paid by the Labor Office local to the employee’s place of work (the contribution must be requested by the employer).

We can help
you with solution

Our customers' opinions

Radek Valasek

Development Group Leader, BRANO a.s.

“The main benefit regarding construction was that we now have 100% order in the data. Previously, some designers stored data on their local drive, then another designer came in, needed to work on the data and took an older version. This stopped when we switched to ENOVIA. We have all the data in PLM, so the designer is always working with the latest data version or can see that someone else is working on it.

From a project management perspective, the greatest benefit is complete data management. Documents can be versioned, and we can see their history – who changed them, how and when. We have task management, so I can see if the task is "stuck" with someone or it’s going the way it’s supposed to. Thanks to ENOVIA we save 15-20% of time on a project, which is noticeable.”

Provided solution: ENOVIA, PLM platform 3DEXPERIENCE

More about solution

Marcel Murar

Johnson Controls Development and Research Center Manager

“We required the new system to easily combine all data in one place. We also needed it to allow the specific set-up of internal processes such as ISS, LTB, etc. Considering the design, it was crucial for us to bring the new system closer to the original processes. All these requirements have been met by ENOVIA.”

Provided solution: ENOVIA, PLM platform 3DEXPERIENCE

More about solution

Pavel Vydra

Technical Director, Managing Director of MODELARNA LIAZ

“Because ENOVIA has enabled us to manage data, or more precisely, all information through any number of links, this has meant that we always have the right information on hand, and thanks to the possibility of web access, we’re able to access this information anywhere at any time.

In our extreme job production (1,600 orders a year), ENOVIA has driven us forward in our important continuous improvement process by enabling us to collect feedback efficiently at many levels of the project implementation process, and to evaluate this information as an essential resource for improving quality and thus efficiency in future.”

Provided solution: ENOVIA, PLM platform 3DEXPERIENCE

More about solution

Radek Kreml

Varroc Lighting Systems, s. r. o.

“Collaboration with DYTRON s.r.o. on developing CAD methodology has helped us to map and better understand the design procedures in the creation of the CAD model, and subsequently to optimize and standardize them.

The knowledge and deployment of the DYTRON expert and his structured, methodical approach were very beneficial. We are currently implementing the CAD methodology with the support of DYTRON, and we see its potential and a real contribution to making design work more efficient.”

Provided solution: Methodology of work in CATIA, CATIA

More about solution

Marek Ctrnacty

CATIA V5 Team, VOLKE Mlada Boleslav spol. s r.o.

“Years ago, we were looking for a way to extend CATIA V5 features and automate recurring engineer activities. We opted for automation using macros and we selected DYTRON as a supplier. This choice has proven to be a great solution. We especially value more than a decade of successful history, a highly cooperative partner and programmer. There’s nothing better than a high quality and lasting partnership.”

Provided solution: macro, CATIA

More about solution

Bohumil Lapka

Product Development Manager, KIEKERT-CS, s.r.o.

“We’ve been working with DYTRON s.r.o. for many years. They provide us with comprehensive training for design engineers from the development department. Our newly arrived employees undergo this training and gain thorough understanding of the CATIA V5 software functionality. Every training session is always accompanied by practical demonstrations that open the door to reality even better. Finally, I must mention the patience of the trainers and also the crucial fact that they know what they’re talking about.

Provided solution: training, CATIA

More about solution

Do you need help?

Write us and we will reach you back

Write us